Speed 400
Cloudster Project
The Jim Adams plan of the Cloudster does not show
the stab ribs as does the Cleveland plan so I went to the copy center today
and had a copy of the Cleveland plan made reduced by the 0.923 scale factor.
This provided the stab rib patterns, which I cut out as shown below.
Since I had the reduced copy anyway, I also cut
out the stab's tip and trailing edge patterns (S1 through S4) as shown
below. Then I realized that I goofed on parts S1 and S2 as they were not for
R/C with the stab and elevator division. So I cut out as second set of S1
and S2 modified from the other side of the plan, which does show the R/C
division. Not a lot of progress today I know, but some. The key to model
building is to do something every day......................Tandy