Speed 400
Cloudster Project
This morning I took the wing up
off of the plans and carefully glued in the center section's bottom main
spar. This now has the two wing halves accurately and securely tied together
so that remaining construction of the center section can continue. Today I
will be working on making the plywood main spar carry through brace support,
installing the recessed leading edge parts, and finalizing the design of the
wing attachment to the fuselage. However, I did place the the wing on the
fuselage and took the picture below so you can get a feel for how a
Cloudster with a polyhedral wing looks..................Tandy