Goldberg "Gas Bird" Construction Project Session #12
By Tommy Gray
AMA 17063
In this session I mounted the stab assembly to the fuselage. In the first picture you can see that I flattened the longerons in order to mount the stab assembly.
Next, I glued everything in place and cut out some 1/8" filler pieces to fill the area between the front of the stab and the fuselage. Once I had it filled and mounted, I glued in the rudder. After everything was glued in place, I added a little balsa colored filler, which will be sanded away when dry leaving a nice smooth joint ready for covering.
Here it is from another angle.
More to come...Tommy!